Hi! Following my first bowl made out of beech wood I’ve decided to make another one but this time I’ll use a cherry wood. The cherry wood has a nice texture compared to the beech and a red color.
Last time when I’ve visited my parents I’ve found a big cherry log hidden somewhere in the back of the yard. It was full of cracks so I wasn’t sure that I could transform it in a bowl but I wanted to give it a try. I’ve took home the cheery log and with a chain saw I cut off some of the edges to get shape similar to a bowl.
I used a chuck screw to fix the wood to the lathe (for those who haven’t seen a chuck screw yet, here is one).
After a bit of work on the lathe using a roughing chisel I’ve managed to get exterior shape for the bowl. Unfortunately the cracks I’ve told you about were quite deep so at that moment I realized that there is nothing I can do to hide this crack. Of course I can ‘fix’ the by fill the cracks with cherry some sawdust but they still will be visible at the end.
Once the exterior was ready I’ve moved to the interior of the bowl using a gauge chisel.
Once both outside and inside was done I had to fix the cracks.
Fixing the bowl wood cracks
To fix the cracks I’ve used some transparent glue mixed with some cherry sawdust resulted from sanding. I let the glue to dry and than did some sanding on the lathe again.
Finishing the bowl
After fixing the cracks I’ve moved on the the finishing part. I’ve applied two coats of finishing wax using a clean cotton towel.
… and here we go, we have nice bowl made out of cherry wood.
One thought on “How make a bowl out of cherry wood”
Thanks. It was good to see how that cherry wood bowl turned out after you fixed the cracks.